BoatworksToday · video

¿Qué cubre este video?

Andy constructs a rigid, lightweight fiberglass storage lid for the aft deck of a Bertram by coring a pre-glassed panel with Kusa. The project aims to span a 3-by-5-foot compartment while minimizing flex.1:30 After sanding the initial three layers of 1708 fiberglass, he evaluates three coring options: 3/4-inch balsa, 1/2-inch Kusa, and 1-inch Kusa.3:15 He selects 1/2-inch Kusa to maintain a manageable thickness, centering the material to leave a 4-inch perimeter for glass adhesion.8:29 He bonds the core using 5-to-1 epoxy, chosen for its superior stiffness, and applies weight to ensure a thin, consistent bond line without squeezing out excess resin.9:49 He then applies a layer of 1708 fiberglass, noting that the finished panel exhibits zero flex but weighs approximately 70 pounds.25:48 The process confirms that Kusa panels require no surface sanding before bonding because they are factory-sanded to a uniform thickness.14:15

Más de BoatworksToday

New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sep 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sep 2026Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago 2026

De BoatworksToday — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.