EXPLORIST life Mobile Marine & Off-Grid Electrical · video

¿Qué cubre este video?

Troubleshooting a Victron battery monitor requires verifying the shunt installation and programming parameters to ensure accurate state-of-charge readings. The shunt must be wired so that only the battery bank connects to the battery side, while all loads, chargers, and chassis grounds connect to the system side.▶ 1:19 If the shunt is installed in reverse, the Victron Connect app allows users to toggle the current measurement direction to "reverse" without rewiring.▶ 3:51 Programming errors often stem from an incorrectly set charged voltage; the rule of thumb for a 12-volt system is to set the charged voltage 0.2 volts below the charger's absorption voltage.▶ 6:12 When the monitor displays a double-dash symbol after a power reset, it indicates the device lacks a confident state-of-charge reading.▶ 7:00 Users can configure the "battery state of charge on reset" setting to "clear" or "keep state of charge," though "clear" is preferred to avoid inaccurate guesses after long periods of inactivity.▶ 7:14 Charging the battery bank to the full absorption voltage via shore power will reset the monitor to 100%.▶ 10:55

Más de EXPLORIST life Mobile Marine & Off-Grid Electrical

Bluetooth vs Wired Battery Monitoring | Battery Monitoring Playlist | Ep: 2/3dic 2025How to Wire a REDARC BCDC Alpha 100 R (Step-by-Step Install Guide)dic 2025Upgrading a Living Quarters Horse Trailer With Lithium Power! (400W Solar + SOK Battery Install)nov 2025How Battery Monitors Actually Work (and Why You Need One) - Battery Monitoring Playlist | Ep: 1/3oct 2025

De EXPLORIST life Mobile Marine & Off-Grid Electrical — ve el barco, la tripulación y cada video analizado del canal.