Living For Sail · video

¿Qué cubre este video?

Restoration work on the 36-year-old sailboat *Antidote* focuses on repairing bulwarks and preparing for the installation of new stanchion backing plates.Watch To ensure a proper cure for polyester-based resins during cooling fall temperatures, a self-regulating 110-volt heat tape is tested to maintain an ambient temperature of at least 60 degrees Fahrenheit.1:43 The owner fabricated a 3D-printed ASA enclosure for the heat tape’s thermostat to provide strain relief and plans to secure the tape to the hull using aluminized tape.3:04 A custom 3D-printed vacuum attachment fitted with weather stripping brushes aids in cleaning debris from the bulwark troughs.7:53 After a 10-week delay with an initial supplier, the project secured a new machinist, Gary, to fabricate G10 FR4 backing plates.9:55 The original stainless steel chain plates, removed to inspect for crevice corrosion, will be reinstalled temporarily to serve as registration points for future external chain plate alignment.11:16 The owner also plans to passivate stanchion bases that show signs of surface rust from improper wire-wheel cleaning.13:13

Barcos en este video

Más de Living For Sail

Can I Save This Bronze Cleat? Sailboat Bulwark Rebuildsep 2026This Was Inside The Boat!? — Should I Put It Back?sep 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!jul 2026

De Living For Sail — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.