Living For Sail · video

¿Qué cubre este video?

John removes a 35-year-old, 1.5-inch bronze seacock from the hull of his boat, *Antidote*, to assess its condition and reconfigure the forward head discharge area.0:27 Because the fitting is frozen and inaccessible from the outside, he uses a modified double-hole saw tool to cut the outer mushroom head from the hull, successfully avoiding damage to the surrounding fiberglass.5:16 The hull thickness at this location measures approximately 0.72 inches.12:48 Upon disassembly in the workshop, the bronze body appears structurally sound, but the internal ball valve is heavily pitted and the drive pin shows signs of brittle failure.22:01 The seacock was not connected to the boat's bonding system, unlike others on the vessel, prompting a comparison of corrosion levels.10:28 The existing backing plate consisted of a 0.25-inch layer of mastic, which John plans to replace with G10 for better load distribution.12:19 Separately, he continues removing rotted plywood from the bulwarks using a chainsaw, noting that aft sections contain more resin and require navigating around stanchion bases and chain plates.13:25

Barcos en este video

Más de Living For Sail

This Was Inside The Boat!? — Should I Put It Back?sep 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!jul 2026⛵️ This DIY Sailboat Repair Has To Work... Right?jun 2026

De Living For Sail — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.