RAN Sailing · video

¿Qué cubre este video?

Johan continues the hull construction of a custom boat at Sunhill Farm, focusing on final fairing and the application of an initial barrier coat.0:21 After sanding the bottom section and transition areas, he applies a fairing compound consisting of epoxy, micro balloons, and colloidal silica to the keel pocket and marked low spots.10:09 To prepare for the barrier coat, he cleans the surface with a tack rag and alcohol.16:11 He mixes West System 105 epoxy with a barrier coat additive and white pigment, resulting in a light gray finish.18:03 Due to the cold temperatures, he uses a fast hardener and works in small batches to prevent premature curing.16:16 He applies the first layer to approximately 40 percent of the hull, specifically the bow section, to assess the fairness of the surface before the hull is flipped for further construction.19:52 The application of the base coat confirms that the previous longboard sanding achieved a fair, uniform surface.20:33

Más de RAN Sailing

Will the Sanding EVER End? Building Our Dreamboat - Ep. 503 Ran Sailingsep 2026Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502sep 2026This Is Where Boat Builds Break People - Ep. 501 Ran Sailingago 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran Sailingago 2026

De RAN Sailing — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.