Living For Sail · video

¿Qué cubre este video?

To prepare the anchor locker of the 35-year-old boat Antidote for painting, the owner applies Interlux Interprotect 2000E barrier coat.0:27 After removing peel ply from previous fiberglass tabbing, the surface is cleaned with soapy water and sanded to ensure a mechanical bond.2:20 The primer requires four to five coats to achieve a 10-mil dry film thickness, which creates a protective barrier of mica plates.4:55 To maintain a dry bilge, the owner tests a Neptunian Sky bilge-drying system, which uses a smartphone-connected pump to remove residual water left behind by standard centrifugal bilge pumps.6:31 The test setup includes a 76-inch head height to simulate the deep bilge of Antidote and a vacuum break to prevent siphoning.9:16 The system successfully evacuates half a gallon of water in two minutes.14:46 The owner plans to route the system's discharge into a shower sump to avoid drilling additional through-hull fittings.15:52 Long-term testing will simulate the water accumulation of a traditional stuffing box.18:05

Barcos en este video

Más de Living For Sail

Can I Save This Bronze Cleat? Sailboat Bulwark Rebuildsep 2026This Was Inside The Boat!? — Should I Put It Back?sep 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!jul 2026

De Living For Sail — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.