The Mariner · video

¿Qué cubre este video?

To prepare an 80-foot vessel for a solo transatlantic voyage, the host removes a decorative metal plate from the pulpit base to address water intrusion and corrosion in the bow locker.1:10 The stanchion base, mounted on a monolithic Kevlar tow rail, requires resealing to prevent moisture from wetting out the hull structure.1:48 The host cleans the bolt holes, applies a marine-grade bedding compound, and secures the hardware, noting that old sealant loses its integrity over time.11:31 To avoid staining the anti-fouling paint with phosphoric acid used for cleaning stainless steel, the host applies the chemical using paper towel bandages.4:39 The vessel is currently docked in Cherbourg, France, where the host manages mooring lines with Dyneema and nylon backups to mitigate wind loads from gusts.13:10 Future plans include entering the Newport Bermuda Race and a subsequent transatlantic record attempt.15:00 The host also upgrades the electrical system, including a 24-volt bilge pump and specialized compass lighting, while provisioning for a 12-day solo passage.16:57

Más de The Mariner

Sailing to Newport, my Trimaran Project & Notes on Archive Management for L- Matrix AI'sjul 2026Taking a Look Around the Waterfront in Lunenburg, Nova Scotiajun 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary Enginemay 2026Introducing Longitudinal AI Systemsmay 2026

De The Mariner — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.