WhiteSpotPirates · video

¿Qué cubre este video?

Flo and Nike's dinghy disappeared overnight at anchor in Palmeira, Sal, leaving them dependent on a paddleboard to ferry themselves and two dogs ashore in 25-knot afternoon winds at Mindelo, São Vicente, Cape Verde.0:11 With no replacement available locally, Flo built a 9-foot Spindrift nesting dinghy from scratch in a borrowed garage in Mindelo, using the stitch-and-glue technique over roughly one week.0:42 The build deviated from the Spindrift plans at nearly every step: epoxy was unavailable, so Flo substituted polyester resin with accelerator and catalyst; only 4mm plywood sheets were on hand instead of the specified thickness, requiring multiple laminated layers for bulkheads, seats, and transom; and zip ties were tried before wire stitching proved necessary.24:40 A panel snapped at a high-load point near the bow during folding and was repaired with fast-curing epoxy and fiberglass before the build continued.17:25 Sawdust and wood chips from cutting were mixed into the polyester as filler.21:24 The finished dinghy is heavier and slower than a standard Spindrift but was built for strength.22:38 The completed hull was cut into two nesting halves and loaded onto a pickup truck for a harbor splash test, covered in part two.27:41

Más de WhiteSpotPirates

I’m going to buy a dutch barge (and I feel unprepared)jul 2026Finally opening up about a different chapter of my life.jul 2026Quick and dirty 500 Euro DIY boat build. Will it sink?jun 2026Has the unusual become the normal?abr 2026

De WhiteSpotPirates — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.