Leading the Escapade · video

Cosa tratta questo video

The crew of Escapade prepares their vessel for relaunch by applying three coats of International Yacht Paint Micron 350 in black.0:36 The process begins with sanding the hull using an orbital sander to remove barnacles and create a smooth surface.0:56 Repairs include filling holes from old bow thruster grates and applying Sikaflex to the keel crease.5:55 Because lead keels oxidize rapidly, the crew uses a steel brush to clean the metal immediately before applying primer.3:01 To improve efficiency during application, they construct custom roller extensions using broomsticks and stainless steel fittings.4:53 After applying the first coat, they wait 24 hours before adding two additional layers to ensure 24 months of protection.8:30 Before the final launch, they pressure wash the deck to prevent drip lines on the fresh paint and touch up the spots under the keel pads once the boat is lifted.6:01 A clean hull significantly improves boat speed and performance on long passages.10:39

Altro da Leading the Escapade

WE’RE BACK AT SEA! 🌴 San Blas, Boat Repairs & Insurance Update! Ep-235set 2026Back on the Water in Bocas del Toro… 🌴 Ep-234ago 2026We Had No Choice But to Let Them Lift Our Boat Again… Ep-233ago 2026They Damaged Our Boat… And We Were Left To Fix It! Ep-232ago 2026

Da Leading the Escapade — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.