Sailing Yabá · video

Cosa tratta questo video

Ben and MP install a CPT Autopilot wheel-drive system on Yabá, a large sailboat preparing for a passage north along the Brazilian coast.0:08 The existing steering system runs from a large wheel through a motorbike cog and chain, then 10mm Dyneema cable through pulleys to a quadrant — a layout that made retrofitting a wheel-mounted autopilot practical.9:16 Installation involves mounting the toothed wheel pulley over the existing steering wheel, attaching the motor box to a custom purpleheart and plywood backing plate for rigidity, and positioning the control box at least 60 centimeters from the chartplotter to avoid compass interference.10:49 MP handles the electrical wiring.14:16 Sea trials begin under power at 3.4–3.7 knots; initial rudder control set to 5 produces frequent small corrections, which Ben reduces by raising the setting to 6, producing slower, larger, less frequent adjustments suited to a heavy boat.23:11 After the first 10–15 minutes of zigzagging, the autopilot holds a straight heading for 0.3 miles continuously.24:42 The crew also purchases a 10-person offshore life raft and an EPIRB ahead of the ocean passage.16:27 A windlass installed during the shipyard period allows anchor deployment from the bow, though Ben notes a bow camera is still needed to monitor chain retrieval.27:37

Altro da Sailing Yabá

Sailing Fully Rigged at Night After Emergency Repairs — Sailing Yabáago 2026Sailing Through the World's Largest Atlantic Rainforest! — Sailing Yabálug 2026Sailing to Brazil's Most Dangerous Sandbanks — Sailing Yabálug 2026My First Solo Sail... Then the Engine Died — Sailing Yabálug 2026

Da Sailing Yabá — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.