Sailing Nervous- Starting Over! · video

Cosa tratta questo video

Preparation of a new fiberglass anchor locker lid requires cleaning the surface with denatured alcohol to remove waxy residue, followed by light hand sanding to ensure proper adhesion.0:11 The layup process involves applying unthickened West System Slow Cure Epoxy to the foam core before laying the fiberglass cloth.2:20 To achieve a dense, resin-rich bond, the cloth is pressed into the wet resin, covered with polyester peel ply, and weighted down using wax paper as a release agent.3:28 The peel ply absorbs excess resin, helping maintain an optimal resin-to-fiberglass ratio during the curing process.3:48 Separately, the crew installs a new foresail, noting that the factory-installed webbing attachments are durable but difficult to thread through the turning blocks and sheet leads.6:23 Adjusting the sail lead position aft improves the final trim of the new headsail.7:40 Proper surface preparation and the use of peel ply ensure structural integrity in fiberglass repairs.

Altro da Sailing Nervous- Starting Over!

My Dad and Me — Before Everything Changedset 2026Could I Start Over Here?ago 2026Drunken Sailorago 2026Starting Over at 65 - The Hardest Chaptersago 2026

Da Sailing Nervous- Starting Over! — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.