Pacific Yacht Systems · video

Cosa tratta questo video

Jeff Cote of Pacific Yacht Systems explains the correct sequence for stacking electrical terminals on bus bars, circuit breakers, and fuse holders to prevent voltage drop.Watch Stainless steel hardware is effectively non-conductive, so the ring terminal must make direct contact with the terminal block or breaker surface.1:13 Placing a stainless steel washer between the ring terminal and the contact point creates unnecessary resistance, which causes significant voltage drop under high current loads.2:19 The proper assembly order requires placing the ring terminal directly against the conductive surface, followed by the flat washer, the lock washer, and finally the nut or bolt fastener.1:57 This stacking method applies to all electrical connections, including battery terminals.2:32 Improperly ordered connections often pass static voltage tests but fail under load.2:19 Regularly inspecting these connections during electrical audits ensures system integrity and prevents hidden resistance in the circuit.2:54

Altro da Pacific Yacht Systems

If Your Old Electronics Still Work Should You Replace Them? PYS Tech Talkset 2026How To INCREASE Your Boat's Value With DIY Electrical - PYS Tech Talkset 2026Our Honest Opinion On The WS500 PRO - PYS Tech Talkset 2026UPGRADING This NEW Boston Whaler To Lithium! Behind The Scenes - PYS Project Highlightset 2026

Da Pacific Yacht Systems — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.