Stella Overboard · video

Cosa tratta questo video

Camille Milligan and Jesse replace the aging bronze through-hulls and seacocks on their sailboat with TruDesign composite fittings while hauled out at Rebak Marina in Langkawi, Malaysia.▶ 0:15 The crew removes the old, seized bronze hardware by grinding the outer flange until the fitting can be driven through the hull from the outside.▶ 1:56 After measuring the existing holes and hose diameters with electronic calipers, they source replacement TruDesign components from Marine Supplies Asia in Chenang.▶ 6:59 The installation process involves sanding the hull surface to bare fiberglass, cleaning with acetone, and applying Sikaflex sealant to the skin fitting.▶ 9:27 The crew custom-cuts the threaded skin fittings to ensure a flush fit before threading on the seacocks and securing them with a load-bearing collar for the engine intake.▶ 10:37 After allowing the sealant to cure for 24 hours, they tighten the fittings and reconnect the hoses.▶ 12:38 Replacing corroded, seized bronze through-hulls with composite fittings eliminates the risk of structural failure and ensures reliable operation of the vessel's underwater valves.

Altro da Stella Overboard

2 Girls, One Sailboat & Our Biggest Milestone Yetlug 2026A Girl Asked to Join Our Sailboat... So We Said Yeslug 2026Sailing to Paradise for Perfect Wavesgiu 2026The Most Remote Wave We've Found Yetgiu 2026

Da Stella Overboard — guarda la barca, l'equipaggio e ogni video analizzato del canale.