Alfredo Contaldo · video

Cosa tratta questo video

Removing air bubbles from a marine compass requires removing the unit from the binnacle, accessing the silicone fill plug, and topping off the internal fluid. To begin, unscrew the mounting flange and the backlight housing to extract the compass from the binnacle.▶ 0:46 Once removed, detach the magnetic compensation elements located underneath, noting their original orientation to ensure accurate re-calibration later.▶ 0:46 Use a multitool or small screwdriver to remove the silicone sealant and the silicone fill plug.▶ 2:11 If the internal expansion diaphragm has collapsed due to a vacuum, removing the plug will allow it to return to its original shape.▶ 2:29 Use a syringe or a cleaned densimeter to inject new fluid into the fill port, tapping the housing gently to release trapped air bubbles.▶ 10:07 After refilling, reseal the plug with fresh silicone.▶ 13:20 Before reinstalling the compass, verify its accuracy by performing a DIY compass swing to check for deviations against known cardinal headings.▶ 16:07

Altro da Alfredo Contaldo

How to pass the chartwork exam for the boating license beyond 12 miles in 2026giu 2026Propeller Shaft Bushing Replacement - 3-Blade Folding Propeller and Zincs 🛠 Onboard Work ⛵mag 2026What is a SELF-TACKING JIB ⛵ Pros and Cons and how it works on a sailboat ⛵apr 2026Can multitools and Swiss Army knives still be used after the "anti-maranza" decree?mar 2026

Da Alfredo Contaldo — guarda la barca, l'equipaggio e ogni video analizzato del canale.