Ale & Max - Y2K Sailing Adventure · video

Cosa tratta questo video

Installing OpenPlotter 3 on a Raspberry Pi 4 requires downloading the headless image from the official website and flashing it to a high-speed SD card using Raspberry Pi Imager.3:08 The 64-bit version is recommended for the Raspberry Pi 4 to optimize processor performance, while the 32-bit version remains suitable for the Raspberry Pi 3.5:14 After flashing, the Raspberry Pi boots as a Wi-Fi access point with the default SSID "openplotter" and password "12345678."12:14 Users connect via VNC Viewer using the IP address 10.10.10.1 and default credentials "pi" and "raspberry."13:27 Once connected, the system must be configured to act as both an access point and a station to enable internet connectivity for system updates.15:46 Updating the OS involves running "sudo apt update" and "sudo apt full-upgrade" in the terminal.20:45 Finally, Signal K is installed to manage and integrate onboard sensor data.24:15

Barche in questo video

Altro da Ale & Max - Y2K Sailing Adventure

Fraser Island by SAILBOAT: Calculating Tides to NOT Run Aground | Ep.14-2026set 2026Back to the OCEAN: 60 Miles Sailing among Whales & Shark Nets (Australia) | Ep.13-2026set 2026WE’RE OFF AGAIN! Course for INDONESIA: Here’s how to come ABOARD with usset 2026FLYING 7,500 MILES: Leaving Y2K in Australia to Fly Back to ITALY! Ep.12-2026ago 2026

Da Ale & Max - Y2K Sailing Adventure — guarda la barca, l'equipaggio e ogni video analizzato del canale.

The Sailing Directory Newsletter

Una email con le migliori scoperte della flotta — i momenti, le barche e le storie che meritano il tuo tempo di visione. Inserisci il tuo indirizzo per riceverne una copia.