Ale & Max - Y2K Sailing Adventure · video

Cosa tratta questo video

OpenPlotter 4 installation on a Raspberry Pi 4 is walked through step by step, from flashing the SD card to remote configuration via VNC Viewer, with a detailed explanation of why the Pi 4 remains the better choice for marine use over the newer Pi 5. Max, aboard Y2K, compares the two boards directly: the Pi 4 draws 2.7 W at idle and 6–7 W under load running OpenCPN, while the Pi 5 draws 3.5 W idle and 8–12 W under load and requires a 5-amp USB-C PD charger rather than a standard 3-amp phone charger.▶ 4:11 Pi 4 pricing runs €65–90 depending on RAM; Pi 5 runs €75–120.▶ 7:07 The installation sequence covers downloading the Raspberry Pi Imager from raspberry.com/software, flashing the OpenPlotter Headless image to a quality SD card, connecting to the Pi's default "openplotter" Wi-Fi hotspot (password 12345678, gateway 10.42.0.1), and accessing the desktop remotely using VNC Viewer version 6.21.11.09.▶ 9:41 Network setup covers both standalone hotspot mode and integration with an onboard router, including how to find the Pi's assigned IP address, disable the default hotspot for security, and change the default password.▶ 21:11 Victron integration is mentioned as a use case for electrical monitoring.▶ 1:55 On boats with limited power budgets, the Pi 4's lower consumption outweighs the Pi 5's performance gains.

Barche in questo video

Altro da Ale & Max - Y2K Sailing Adventure

EVERYTHING CHANGES! 1200Ah Lithium & Flying Home to Italy (Sailboat Refit) - Ep. 11-26lug 2026All this for a HOLE in the Teak! (Engine and Water Heater Overhaul) | Ep. 09/2026mag 2026We might have FOUND the LEAK! (And we ran away to New Zealand)mag 2026Y2K Transforms: NEW UPGRADES to head back to the OCEAN (Sailboat) - Ep. 8-26mag 2026

Da Ale & Max - Y2K Sailing Adventure — guarda la barca, l'equipaggio e ogni video analizzato del canale.