Expedition Evans · video

Hva denne videoen dekker

Brett and Jade Evans install a custom dinghy davit system integrated into the carbon fiber hardtop of their sailboat while anchored in the Bahamas. The design features internal conduits and pulleys that route Dyneema lines from the hardtop to the cockpit winches. To mount the hardware, they drill through the hardtop, which includes pre-installed marine plywood backing blocks for structural integrity.▶ 14:38 They secure low-friction rings using epoxy mixed with silica, creating a structural "donut" around the mounting holes.▶ 2:45 After failing to fish the lines through the internal pulleys using steel wire, they successfully use a smaller intermediary line to guide the Dyneema through the conduit.▶ 18:32 The system successfully lifts the dinghy out of the water, confirming the mechanical design of the davits, pulleys, and locking clutches.▶ 24:10 The project concludes with the davits operational, leaving the final painting of the hardtop for a subsequent phase.

Mer fra Expedition Evans

Why Everyone is QUITTING Sailing | EE 175mai 2026HOW WE EAT? (first we have to catch it) | EE 173mars 2026Land After 20 Days at Sea — We Finally Made Itdes. 2025The Reprieve is OVER. 19 Days on the Ocean and The Struggle Begins Againdes. 2025

Fra Expedition Evans – se kanalens båt, mannskap og alle analyserte videoer.