Sailing Yabá · video

Hva denne videoen dekker

The crew installs four bilge pumps in their wooden boat, Yabá, to ensure a reliable water-evacuation system.0:59 They select two 24-volt Rule 3700-gallon-per-hour pumps for the engine room and main living area, and two Shurflo 2000-gallon-per-hour pumps for the bow locker and an additional forward bulkhead location.1:05 Each pump features an automatic float switch and a manual override switch at the helm, wired directly to the battery bus bar to remain powered even when the main 24-volt panel is shut off.1:47 The installation requires fabricating custom wooden supports to mount the pumps at the lowest accessible points of the bilge.18:49 One planned location under the beds proves unsuitable due to ballast and keelson obstructions, necessitating a remote-mount pump with an intake hose for that area.13:03 The crew also seals two remaining through-hull fittings with epoxy and sealant to finalize the underwater hull integrity.21:20 Proper wiring to a dedicated, always-on bus bar ensures the pumps remain functional during long-term absences.25:38

Mer fra Sailing Yabá

Is a Huge Crew Always Better? (Bittersweet Voyage Surrounded by Whales) — Sailing Yabáokt. 2026Yabá gets Brand New Sails & Set Sail Immediately!— Sailing Yabáokt. 2026Everything Has to be Perfect: Preparing the Rig for Brand New Sails — Sailing Yabásep. 2026Our Sails Ripped on Their Last Journey Before a Massive Upgrade! — Sailing Yabásep. 2026

Fra Sailing Yabá – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.