Sailing Yabá · vídeo

Qué cubre este vídeo

The crew installs four bilge pumps in their wooden boat, Yabá, to ensure a reliable water-evacuation system.0:59 They select two 24-volt Rule 3700-gallon-per-hour pumps for the engine room and main living area, and two Shurflo 2000-gallon-per-hour pumps for the bow locker and an additional forward bulkhead location.1:05 Each pump features an automatic float switch and a manual override switch at the helm, wired directly to the battery bus bar to remain powered even when the main 24-volt panel is shut off.1:47 The installation requires fabricating custom wooden supports to mount the pumps at the lowest accessible points of the bilge.18:49 One planned location under the beds proves unsuitable due to ballast and keelson obstructions, necessitating a remote-mount pump with an intake hose for that area.13:03 The crew also seals two remaining through-hull fittings with epoxy and sealant to finalize the underwater hull integrity.21:20 Proper wiring to a dedicated, always-on bus bar ensures the pumps remain functional during long-term absences.25:38

Más de Sailing Yabá

Is a Huge Crew Always Better? (Bittersweet Voyage Surrounded by Whales) — Sailing Yabáoct 2026Yabá gets Brand New Sails & Set Sail Immediately!— Sailing Yabáoct 2026Everything Has to be Perfect: Preparing the Rig for Brand New Sails — Sailing Yabásept 2026Our Sails Ripped on Their Last Journey Before a Massive Upgrade! — Sailing Yabásept 2026

De Sailing Yabá — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.