Sailing With Phoenix | Oliver · video

Hva denne videoen dekker

To prepare for a Pacific crossing from Oregon to Hawaii, the owner of a sailboat modifies the anchor locker to accommodate a new windlass and increased ground tackle. The current setup uses a Lewmar V700 windlass limited to 50 feet of 1/4-inch chain and 150 feet of rode.2:08 The planned upgrade involves a Lewmar V2 windlass paired with 150 feet of 5/16-inch high-test chain and an additional 150 feet of rode.3:30 To create sufficient space for this heavier gear, the owner removes an internal wooden divider within the anchor locker that previously restricted volume.6:17 Using an angle grinder, the owner cuts through the fiberglass-bonded wood partition over several hours, taking care to avoid damaging the hull.9:58 The project concludes with the successful removal of the divider, though the final fit of the new chain and rode remains unverified until the windlass installation.20:34

Mer fra Sailing With Phoenix | Oliver

38 days until I sail around the world without stopping aug. 2026First Sail Alone Since Sailing To Hawai'iaug. 202664 Days Until I Sail Nonstop Around The Worldjuli 2026I've been doing a bad job...mai 2026

Fra Sailing With Phoenix | Oliver – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.