Sailing With Phoenix | Oliver · video

What this video covers

To prepare for a Pacific crossing from Oregon to Hawaii, the owner of a sailboat modifies the anchor locker to accommodate a new windlass and increased ground tackle. The current setup uses a Lewmar V700 windlass limited to 50 feet of 1/4-inch chain and 150 feet of rode.2:08 The planned upgrade involves a Lewmar V2 windlass paired with 150 feet of 5/16-inch high-test chain and an additional 150 feet of rode.3:30 To create sufficient space for this heavier gear, the owner removes an internal wooden divider within the anchor locker that previously restricted volume.6:17 Using an angle grinder, the owner cuts through the fiberglass-bonded wood partition over several hours, taking care to avoid damaging the hull.9:58 The project concludes with the successful removal of the divider, though the final fit of the new chain and rode remains unverified until the windlass installation.20:34

More from Sailing With Phoenix | Oliver

38 days until I sail around the world without stopping Aug 2026First Sail Alone Since Sailing To Hawai'iAug 202664 Days Until I Sail Nonstop Around The WorldJul 2026I've been doing a bad job...May 2026

From Sailing With Phoenix | Oliver — see the channel’s boat, crew, and every analysed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.