Sven Yrvind · video

Hva denne videoen dekker

Sven Yrvind installs four lifting padeyes on his custom high-latitude, shallow-draft sailboat to facilitate port-side hauling. Each padeye utilizes a rope with a 5.5-tonne breaking strength, providing a combined 22-tonne capacity for a vessel weighing approximately 1.2 tonnes.▶ 2:00 The installation process involves threading the rope through the hull side, saturating the assembly with epoxy mixed with fumed silica, and reinforcing the exterior with glass fiber.▶ 3:17 Each padeye features a 15-by-15 centimeter base to distribute the load across 225 square centimeters of the hull.▶ 4:03 Yrvind applies the epoxy in stages, allowing the material to cure while green before adding subsequent layers to ensure structural integrity.▶ 3:23 These padeyes provide a significant margin of safety for lifting the boat during future maintenance or port arrivals.

Mer fra Sven Yrvind

Kai the bow paddle.juli 2026About safety.juli 2026My solution to crossing the Doldrums without using an engine.juli 2026Goose Barnacles Remower.juli 2026

Fra Sven Yrvind – se kanalens båt, mannskap og alle analyserte videoer.