RAN Sailing · video

Hva denne videoen dekker

Johan and Malin are building a new boat in a barn in Sweden, currently focusing on laminating the internal hull skin with fiberglass and epoxy.0:09 After completing the starboard side, Johan transitioned to the port side, utilizing a custom-built hanger for the fiberglass roll to facilitate solo lamination.5:49 The process involves sanding, cleaning surfaces with alcohol, and working through the night to ensure consistent application.2:35

The project also involves transitioning from plywood to PET foam for bulkheads and interior structures.7:45 This material choice saves approximately 1,000 kilograms of weight compared to plywood and costs roughly one-third the price of traditional PVC foam.8:20 The selected PET foam has a density of 100 kilograms per cubic meter, which provides structural strength comparable to 80-kilogram PVC foam.9:33 While the foam core requires additional labor to laminate both sides with fiberglass, the weight savings allow for more ballast in the keel.8:45 The hull interior lamination is now complete.18:13

Mer fra RAN Sailing

Will the Sanding EVER End? Building Our Dreamboat - Ep. 503 Ran Sailingsep. 2026Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502sep. 2026This Is Where Boat Builds Break People - Ep. 501 Ran Sailingaug. 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran Sailingaug. 2026

Fra RAN Sailing – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.