BoatworksToday · video

Hva denne videoen dekker

Applying one-part marine paint requires careful surface preparation, including de-waxing and sanding with 320-grit paper, followed by a final wipe with a tack rag.3:26 When using Total Boat Wet Edge, thin the paint 5–10% and pour only enough for a 5–10 minute application window to minimize solvent evaporation.5:32 In shop temperatures of 60–65 degrees Fahrenheit, one-part paints cure slowly through solvent evaporation, often requiring two days before the surface is firm enough to sand with 400-grit paper for a second coat.12:57 While two-part paints offer a harder chemical cure, one-part paints can provide excellent results on a budget.1:26 Redtree four-inch mohair mini rollers provide the best balance for rolling and tipping, avoiding the heavy stippling of foam rollers or the excessive material deposit of thick-nap rollers.3:48 Progress on the Bertram transom restoration remains paused as the owner prioritizes Patreon project consultations, with future updates planned once enough footage is banked.19:15

Mer fra BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!aug. 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!aug. 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.