BoatworksToday · vídeo

Qué cubre este vídeo

Applying one-part marine paint requires careful surface preparation, including de-waxing and sanding with 320-grit paper, followed by a final wipe with a tack rag.3:26 When using Total Boat Wet Edge, thin the paint 5–10% and pour only enough for a 5–10 minute application window to minimize solvent evaporation.5:32 In shop temperatures of 60–65 degrees Fahrenheit, one-part paints cure slowly through solvent evaporation, often requiring two days before the surface is firm enough to sand with 400-grit paper for a second coat.12:57 While two-part paints offer a harder chemical cure, one-part paints can provide excellent results on a budget.1:26 Redtree four-inch mohair mini rollers provide the best balance for rolling and tipping, avoiding the heavy stippling of foam rollers or the excessive material deposit of thick-nap rollers.3:48 Progress on the Bertram transom restoration remains paused as the owner prioritizes Patreon project consultations, with future updates planned once enough footage is banked.19:15

Más de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!ago 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajul 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.