Sailing Uma · video

Hva denne videoen dekker

The crew of the 50-year-old sailboat Uma removes the rudder to inspect for water damage and potential bushing failure.1:18 After disconnecting the steering quadrant and autopilot tiller arm from inside the cockpit locker, they remove the bronze cap at the base of the skeg and slide the rudder assembly out.3:17 The rudder blade, which the crew expected to be foam-cored, proves to be solid fiberglass, showing no signs of delamination or internal water saturation.15:45 Conversely, core samples taken from the skeg reveal saturated foam and filler, necessitating future excavation and repair.20:12 The project also involves filling unused deck holes with epoxy to prepare for new hardware installations, utilizing G10 backing plates for future through-bolted deck gear.7:27 The rudder removal confirms the structural integrity of the stainless steel rudder post and blade, though the skeg requires further remediation to address the trapped moisture.12:52

Mer fra Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !sep. 2026Our boat won’t look the same after this | Step 495aug. 2026The ONE Thing We Disagreed on This Entire Refit | Step 494aug. 2026We Owe You The Full Storyjuli 2026

Fra Sailing Uma – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.