BoatHowTo · video

Hva denne videoen dekker

Rapid depletion of zinc anodes at the dock typically indicates galvanic corrosion rather than stray current.2:04 Galvanic corrosion occurs when a boat lacks a galvanic isolator or isolation transformer, causing the vessel’s zincs to protect other metal objects or boats connected to the same shore power ground.2:04 Stray current corrosion, by contrast, involves a positive DC conductor fault that bypasses the zinc and causes rapid metal loss on the positive side of the circuit.0:53 Standard multimeters cannot accurately diagnose these issues while the boat is in the water.2:27 Accurate testing requires a silver-silver chloride half-cell lowered into the water to measure millivoltage across the bonding system.2:39 To prevent galvanic corrosion, install a galvanic isolator or an isolation transformer.4:50 Alternatively, disconnect shore power when not actively charging batteries, relying on solar power or other independent sources to maintain the battery bank.4:58

Mer fra BoatHowTo

Boat ELECTRIC PROPULSION with only LEAD ACID Batteries ?? | Ask The Expert with NIGEL CALDERsep. 2026MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERsep. 2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDERsep. 2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDERaug. 2026

Fra BoatHowTo – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.