Chez Team · video

Hva denne videoen dekker

Eze and Chilu delay their departure from San Juan, Puerto Rico, to the Bahamas to perform structural reinforcements on their boat’s transom.11:50 While installing custom davits for their dinghy and solar panels, the fabricator identified that the fiberglass hull was too thin to support the load safely.13:53 To prevent potential cracking or structural failure during offshore passages, the crew is applying six to seven layers of fiberglass and resin to the transom.17:16 During this delay, they also perform maintenance on their marine air conditioning units by flushing the saltwater cooling circuits with a 3:1 vinegar-to-water solution to remove salt buildup, algae, and marine growth.6:24 The process involves using a small pump to recirculate the mixture through the heat exchanger for one hour per unit.8:24 The crew relies on local assistance for the fiberglass work and system maintenance to ensure the vessel is prepared for the upcoming transit.15:07

Mer fra Chez Team

We went to Punta Cana and Bayahíbe: which one would we choose? | Ep. 112 - Chez Teamaug. 2026We risked crossing at night and this happened on the way to the Dominican Republic | Ep. 111 - Ch...aug. 2026The reason for deciding whether to sail to Cuba is not what you imagine | Ep. 110 - Chez Teamaug. 2026Why do sailing families seek each other out? | Ep. 109 - Chez Teamaug. 2026

Fra Chez Team – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.