Chez Team · vidéo

Ce que couvre cette vidéo

Eze and Chilu delay their departure from San Juan, Puerto Rico, to the Bahamas to perform structural reinforcements on their boat’s transom.11:50 While installing custom davits for their dinghy and solar panels, the fabricator identified that the fiberglass hull was too thin to support the load safely.13:53 To prevent potential cracking or structural failure during offshore passages, the crew is applying six to seven layers of fiberglass and resin to the transom.17:16 During this delay, they also perform maintenance on their marine air conditioning units by flushing the saltwater cooling circuits with a 3:1 vinegar-to-water solution to remove salt buildup, algae, and marine growth.6:24 The process involves using a small pump to recirculate the mixture through the heat exchanger for one hour per unit.8:24 The crew relies on local assistance for the fiberglass work and system maintenance to ensure the vessel is prepared for the upcoming transit.15:07

Plus de vidéos de Chez Team

We went to Punta Cana and Bayahíbe: which one would we choose? | Ep. 112 - Chez Teamaoût 2026We risked crossing at night and this happened on the way to the Dominican Republic | Ep. 111 - Ch...août 2026The reason for deciding whether to sail to Cuba is not what you imagine | Ep. 110 - Chez Teamaoût 2026Why do sailing families seek each other out? | Ep. 109 - Chez Teamaoût 2026

De Chez Team — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.