Sail Lifevideo
⛵️ 3D scanning our old windows and a small plaster mold setback. New windows part 5! Ep 672
29. mars 2026 · 25 min · 83K visninger
Hva denne videoen dekker
To manufacture replacement windows for an Antares Yachts 44, the project involves thermoforming 10mm acrylic sheets over custom-made plaster molds. The process begins by using an EinScan Vega 3D scanner to capture the curvature of existing boat windows.1:02 To ensure accurate data capture on the smooth, reflective acrylic, the surface is coated with 3D scanning spray and marked with 12mm tracking dots.15:56 The resulting point cloud is converted into a 3D mesh for CAD modeling.16:37
For the molds, a CNC machine cuts a plug from MDF, which is then sealed with TotalBoat High Performance Epoxy and coated with wax.3:55 Plaster of Paris is poured into the plug to create the final mold, with some tests incorporating 3% chopped fiberglass strands for added strength.5:33 To optimize heat distribution during the thermoforming process, a four-channel data logger monitors temperatures inside and above the plaster molds while they dry in a 6000-watt DIY electric oven.14:47 The project also includes installing an Airlock 1 air purification system to manage cabin odors.9:10
Båter i denne videoen
Mer fra Sail Life
Fra Sail Life – se kanalens båt, mannskap og alle analyserte videoer.
The Sailing Directory Newsletter
Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.