BoatHowTo · video

Hva denne videoen dekker

Nigel Calder explains why a circuit breaker is preferred over a MEGA or ANL fuse in a windlass circuit: when an anchor fouls and the operator keeps pressing the switch, the motor overloads repeatedly, and a resettable circuit breaker lets the crew recover without replacing a blown fuse.▶ 0:41 A fuse works but requires a spare and a swap; a circuit breaker trips and resets.▶ 0:49 Calder notes he has burned out two or three windlass motors himself.▶ 0:00 Both devices should be rated to the ampacity of the conductor, not the motor's nominal draw.▶ 1:49 Bow thruster circuits follow different logic — the motor cannot be mechanically jammed the same way, overload currents stay lower, and the high amperage required makes affordable, compact circuit breakers hard to source, so a fuse is standard there.▶ 1:22 A windlass circuit can carry both a circuit breaker and a fuse in series.▶ 1:33 Conductor sizing and overcurrent protection sizing are covered in the BoatElectrics101 course at BoatHowTo.com.▶ 2:13

Mer fra BoatHowTo

ONE SWITCH for TWO PUMPS?? (Pontoon Boat Setup) | Ask The Expert with NIGEL CALDERjuli 2026OIL LEAKS at the Crankshaft... | Ask The Expert with NIGEL CALDERjuli 20261-2-both switch - Cost effective charging system on small boats? 🤔 Ask The Expert with NIGEL CALDERjuni 202648V or 24V - What makes more sense on a Boat? | Ask The Expert with NIGEL CALDERjuni 2026

Fra BoatHowTo – se kanalens båt, mannskap og alle analyserte videoer.