MJ Sailingvídeo
Lifting Our 7,000 lb Catamaran By Ourselves!! - Changing Our Base to Foam (MJ Sailing - Ep 285)
20 de maio de 2023 · 23 min · 61K visualizações
O que este vídeo aborda
To support a catamaran hull during a long-term refit, the crew replaces temporary plywood and jack supports with four high-density foam blocks.3:55 The team selects 1.35-pound density foam, a material commonly used in boatyards and recommended by Gunboat 48 owners to cradle hulls and distribute weight across a wider surface area.4:03 To maintain the boat's precise level, the crew uses a laser level to mark reference points on the hull, ensuring the vessel remains in the same position as when the interior bulkheads were installed.5:13 They construct a foundation for the foam using cinder blocks, paving stones, and countertop scraps.13:00 After positioning the blocks, the crew spends several days making iterative adjustments—swapping plywood shims and shaving the foam—to account for the settling of the crushed stone base.11:17 Despite initial fluctuations in height, the team achieves a uniform support level within one-eighth of an inch across all four points.22:27
Mais de MJ Sailing
De MJ Sailing — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.