Sailing NV · vídeo

O que este vídeo aborda

The crew of the Open 66 sailboat NV performs a rudder shaft realignment while hauled out in a remote North Borneo boatyard.Watch The rudder’s wet bearing system had slipped downward by approximately 5 millimeters, causing the top seal to lose contact with the bearing and allowing water ingress.2:46 To correct the alignment, the crew constructs a temporary support structure using oil drums, wood, and wedges to stabilize a hydraulic jack beneath the rudder.12:47 After cleaning oxidation from the stainless steel shaft with acid and silicone grease, they use the jack to lift the shaft into its proper position.4:15 To prevent future slippage, they drill into the shaft and install four clamping bolts to lock it in place.16:04 The crew also re-tensions the Spectra rope steering quadrant system, which utilizes two independent circuits for redundancy.19:48 The rudder now moves smoothly without noise or structural binding.22:16

Mais de Sailing NV

Our Engine Room Is Flooding… Where Is the Water Coming From? | S3 Ep 2109/2026BEFORE YOU SERVICE YOUR MARINE DIESEL, WATCH THIS! | Nanni N4.65 Full Service09/2026How to Save Your Boat at Anchor: 2-Anchor Systems Explained | S3 Ep 2008/2026We Didn't See This Coming... | S3 Ep 1908/2026

De Sailing NV — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.