Sailing Uma · vídeo

O que este vídeo aborda

Epoxy and vinylester resins perform similarly when used for structural tabbing and bonding marine plywood, according to unscientific stress tests conducted during a boat refit.0:25 The crew compared the two resins by laminating plywood samples and tabbing fiberglass ribs onto existing bilge structures, then applying manual leverage to induce failure.1:24 In all tests, the failure occurred within the plywood or at the mechanical bond interface rather than within the resin-fiberglass laminate itself.16:07 Vinylester costs approximately 10 euro per liter, while epoxy costs between 35 and 42 euro per liter; the crew estimates using vinylester saved them 9,000 euro over the course of their 300-liter refit.11:54 While epoxy offers better penetration into wood and is often preferred for structural gluing, the tests suggest vinylester provides sufficient strength for most secondary bonding applications on their nine-ton vessel.23:31 The crew concludes that using epoxy for every task is often overkill, though they plan to use epoxy for specific wood-to-wood bonding and small-scale structural work.24:24

Mais de Sailing Uma

We're Finally Setting Sail Again!09/20264 Hours to Rig Solar for an 8-Month Solo Circumnavigation09/2026Solar Sponsor Backed Out Before Sailing Around the World !09/2026Our boat won’t look the same after this | Step 49508/2026

De Sailing Uma — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.