BoatHowTo · vídeo

O que este vídeo aborda

Excessive galvanic protection causes cathodic disbondment, which strips bottom paint from bronze through-hulls and triggers delignification in wooden hulls.1:14 Replacing zinc anodes with aluminum anodes often increases the total surface area of the sacrificial metal, leading to overprotection.1:03 Nigel Calder recommends using a silver-silver chloride half-cell to measure the voltage potential of the bonding system.1:59 By hanging the half-cell in the water and connecting it to a multimeter, a boat owner can compare the natural voltage of the protected metal against the anode.1:35 A proper protective shift should measure approximately 200 millivolts above the natural voltage of the metal.3:06 Readings of 400 to 600 millivolts indicate excessive protection.3:34 Reducing the total surface area of the installed anodes, such as using one anode instead of two, corrects the overprotection and prevents damage to surrounding materials.3:50

Mais de BoatHowTo

Boat ELECTRIC PROPULSION with only LEAD ACID Batteries ?? | Ask The Expert with NIGEL CALDER09/2026MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDER09/2026Common Ground Point with Isolated Saildrives | Ask The Expert with NIGEL CALDER09/2026How to keep you TANK CLEAN in the days of BIODIESEL.. | Ask The Expert with NIGEL CALDER08/2026

De BoatHowTo — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.