RAN Sailingvídeo
Preparations For Laminating A 50ft Hull - Ep. 364 RAN Sailing
22 de setembro de 2023 · 20 min · 121K visualizações · Skåne län
O que este vídeo aborda
Preparation for laminating a 50-foot wooden hull involves removing approximately 3,000 screws and washers used during the planking process.2:03 To maintain the hull's shape after removing the final row of screws, internal blocks are installed to secure the planking against temporary frames.5:43 The hull surface requires a light sanding, followed by filling all screw holes and bilge gaps with thickened epoxy.4:49 A thin coat of epoxy applied with rollers and peel ply will provide a base for fiberglass application, eliminating the need for intermediate sanding.5:04
To accommodate future fiberglass layers without increasing hull thickness, a 100 mm wide recess is routed along the shear line and transom.8:54 Sharp 90-degree edges at these transitions are beveled to 45 degrees using a router and hand plane to ensure the fiberglass conforms to the hull without air gaps.17:02 Fairing is deferred until after the fiberglass application to account for surface irregularities introduced by the laminate.5:56
Fairing after fiberglass application prevents the need for double-sanding the hull.6:22
Mais de RAN Sailing
De RAN Sailing — veja o barco, a tripulação e todos os vídeos analisados do canal.
The Sailing Directory Newsletter
Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.