BoatworksToday · vídeo

O que este vídeo aborda

Andy continues the restoration of a 1970 Paceship Yachts Westwind 24 by removing deck hardware and evaluating the cabin top for fairing.0:10 He chooses epoxy over polyester resin for patching old hardware holes to expedite the sanding process.1:32 During the evaluation, he discovers a significant half-inch dip in the cabin top that requires a structural solution to prevent water pooling near the port lights.3:19

The project shifts to the interior, where Andy replaces the rotted sole with Coosa board.5:51 He selects the 20-pound density Blue Water series for its structural rigidity compared to the more flexible Nautical line.7:08 Because the boat’s bilge is only four inches deep and divided by the keel, he determines that a traditional bilge pump will not fit.8:10 He plans to install two remote-mounted pumps in the aft locker, each with a long intake hose to service the isolated port and starboard bilge sections.10:29 He seeks recommendations for remote-mount bilge pumps capable of handling long intake runs.11:28

Mais de BoatworksToday

V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!08/2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camera07/2026Fiberglassing The Bulkheads & Sole On My 1970 Westwind Paceship 24 Pocket Cruiser!07/2026I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!07/2026

De BoatworksToday — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.