The Marinervideo

90 days to the Newport Bernuda Race

March 18, 2026 · 13 min · 1K views

Man applies epoxy to hull repair under warm light

What this video covers

Exactly 90 days before the Newport Bermuda Race start, Chris is preparing Osprey in a European marina for a 2,800-mile solo qualifying passage back to North America.5:14 The $6,000 race entry fee is due immediately, with the first $3,000 installment needed within days; crew sponsorship slots are open to fund that fee plus a $1,000 ORR certificate and a $4,000 life raft recertification.5:28 Hull damage sustained when Osprey was pinned against a dock cleat for four hours in 120 km/h winds is being temporarily sealed with epoxy-wetted Kevlar and a traffic cone as a pressure clamp, pending professional assessment of the Kevlar-Nomex-Kevlar laminate hull and five chain plate positions.3:06 Interior LED lighting has just been installed.0:32 A new dual-intake seacock and strainer arrangement will let Chris select the leeward engine water intake on either tack, solving an overheating problem on port tack.9:40 A Lytime 24V 100Ah lithium battery doubles battery capacity to 200Ah, with a spare bringing total usable storage to roughly 270Ah rechargeable in under two hours from the main engine alternator.11:20 Cockpit rope bag organization and foredeck grab handle repositioning are also underway.1:29 The Atlantic crossing also qualifies Osprey for the Global Solo Challenge.5:54

Watch on YouTube

Featured in the fleet's guides

More from The Mariner

Sailing to Newport, my Trimaran Project & Notes on Archive Management for L- Matrix AI'sJul 2026Taking a Look Around the Waterfront in Lunenburg, Nova ScotiaJun 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary EngineMay 2026Introducing Longitudinal AI SystemsMay 2026

From The Mariner — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.

Report an issue