Sailing Zephyr · video

What this video covers

The crew of the Beneteau Oceanus 43 *Zephyr* is installing a custom fold-down swim platform at Kentmore Marina.0:58 To ensure the transom can support the hardware, they are de-coring the Nida plastic core around the mounting points for the pad eyes and hinges.1:12 Using an allen key attached to a drill, they shred the core material through a small pilot hole, vacuum out the debris, and backfill the cavity with thickened polyester resin to create a solid mounting surface.2:17 After the resin cures, they fair the surface using TotalBoat polyester fairing compound and sand the area through 80, 150, and 220 grits.8:33 The final preparation involves applying a two-part All-Grip epoxy primer in a temperature-controlled shop, followed by a top coat of Beneteau Traffic White paint.10:06 The hardware configuration includes two pad eyes at the corners to connect Dyneema lines for support, alongside the primary hinge points.1:12

Boats in this video

More from Sailing Zephyr

We Finally Fixed the Worst-Looking Part of Our Boat Ep. 277Jun 2026We Somehow Made It To The Bahamas...Then The Boat Work Started - Ep.276Jun 2026Our New Boat Finally Hits The Water - Ep. 275May 2026The Reality of Getting This Boat Ready - Ep. 274May 2026

From Sailing Zephyr — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.