Sail Life · video

What this video covers

Mads and his guest Klaus work on a 44-foot catamaran project, focusing on steering system restoration, dripless shaft seal installation, and hull preparation.Watch To install flush skin fittings and a depth sounder on a curved hull section, they use custom 3D-printed jigs.0:45 The depth sounder jig, featuring a flexible TPU sleeve, successfully creates a flat mounting surface after being cast with thickened epoxy and released with PVA.12:54 The steering system repair requires fabricating a new aluminum mounting flange to replace a corroded original, followed by the installation of a new U-joint.8:50 With assistance from a friend named Jeff, the team successfully connects the steering gearboxes and confirms the helm is operational.21:41 Additionally, they install new dripless shaft seals, which utilize a carbon-on-stainless interface to prevent water ingress.14:40 A shipping error delays the installation of the correct flexible engine couplings.19:17 The project concludes with the replacement of a failed 3M Versaflow respirator blower motor, clearing the way for upcoming hull fairing work.20:39

Boats in this video

More from Sail Life

Can I build an aluminum fuel tank with the xTool MetalFab laser welder and CNC? Ep. 693Aug 2026The road back to boat work: shipping delays, site prep and bending metal with a 3D print Ep. 692Aug 2026The road back to boat work: Cutting trees, picking up plywood, and 240V in the shop. Ep. 691Aug 2026Our Mammotion LUBA 3 AWD is going to save us so a lot of time!Aug 2026

From Sail Life — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.