WEsail · video

What this video covers

The crew prepares for a passage across the Sea of Cortez by completing several maintenance tasks while docked in San Carlos. Repairs include replacing a refrigerator condenser using parts salvaged from a discarded unit and reinforcing a weak brow on the deck using carbon fiber rods.13:05 To prevent drilling too deep into the deck, the host uses a section of hose as a depth stop on the drill bit.13:52 The crew also addresses steering play by opening a stress crack in the steering arm to allow for a tighter clamp on the rudder shaft, noting this is a temporary fix until the boat is hauled out.11:07 After departing the dock in light wind, the crew successfully transitions to sailing with 10 knots of wind.24:08 The primary takeaway is that using a hose sleeve on a drill bit provides a simple, effective depth gauge for blind drilling into fiberglass.

More from WEsail

13 Knots, Big Seas & Dolphins at Sunset | Sailing Back to Fiji's MainlandAug 2026We Don't Know Where We're Going Next | Leaving Fulaga, Fiji & Sailing SomewhereAug 2026We Ran Out of Gas Saying Goodbye | Our Last Days in Fulaga, FijiJul 2026Nobody Mentioned the Cave of Bones | Three Weeks in Fulaga, FijiJul 2026

From WEsail — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.