Acorn To Arabella · video

What this video covers

Steve and the crew of the 38-ft wooden boat Arabella prepare for a transit from Camden, Maine, to Rockland for a haul-out.Watch To ready the vessel for travel, Steve installs a diesel heater, using Hardiebacker cement board as a heat shield to protect overhead deck beams from exhaust pipe temperatures.4:14 He also completes the jib furling system by installing a stand-up block on the bowsprit and routing the furling line through a low-friction ring lashed with 1/8-inch Dyneema.11:47 After losing battery state-of-charge data during electrical work, the crew moves the boat to Lyman Moors in Camden to connect to shore power and fully charge the battery bank.7:21 During a previous storm, the crew successfully held the boat off the dock using a multi-line spring system, though the high tension caused a section of the oak toe rail to snap.19:56 Steve plans to repair the damaged rail by scarfing in a new piece, noting that the modular design of the rail allows for easier replacement than if it were integrated into the covering board.25:05

More from Acorn To Arabella

We Stripped Our Wooden Sailboat Back to Bare Wood... AgainOct 2026Saying Goodbye to Newfoundland—and the Man Who Inspired ArabellaSep 2026Upgrading the Rudder and Another Trek To The CliffAug 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastJul 2026

From Acorn To Arabella — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.