Acorn To Arabella · video

What this video covers

The construction of the wooden boat *Arabella* reaches several milestones, including hull fairing, watermaker installation, and sail production. Volunteers sanded the hull to 120 grit on the top strakes and 80 grit on the bottom strakes to prepare for painting.9:42 The crew installed a watermaker system in the head, mounting components like a high-pressure booster pump, a five-micron filter, and a gas-charged bladder accumulator onto wood panels bonded to the bulkheads with adhesive rather than through-bolts to avoid electrical interference.3:02 RJ, the ship manager for the *Schooner Amistad*, applied copper plating to the stern to mitigate marine growth.5:31 Meanwhile, at Doyle Sails in Salem, Massachusetts, technicians used a 60-foot table to nest and cut panels for the mainsail from 8.47-ounce recycled polyester cloth, following a design by Robbie Doyle.18:13 The process involves aligning panels to the cloth's weave and adding adhesive-backed Dacron patches for reinforcement at high-stress points.25:58

More from Acorn To Arabella

Upgrading the Rudder and Another Trek To The CliffAug 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastJul 2026Exploring Newfoundland's Unclimbed Coastal Cliffs by SailboatJul 2026Fjord Hopping | Arabella Sails East Toward The NuddickJul 2026

From Acorn To Arabella — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.