RAN Sailing · video

What this video covers

Johan and Malin are constructing a series of square-shaped wooden frames to rotate the hull of their new boat, which they are building from scratch at Sunhill Farm.0:21 To ensure the hull remains secure during the rotation, Johan designed these frames to fit within the barn’s limited space, necessitating a narrow clearance of approximately three centimeters on each side when moving the boat through the barn wall.17:27 He used laser measurements to verify the curve of the keel pocket, ensuring the template remains within a one-to-two millimeter tolerance.3:00 The construction process involves reinforcing plywood cradle boxes with 8mm steel backing plates, which are bonded to the wood using thickened epoxy.9:27 Johan opted to build the frames inside the barn to protect the project from unpredictable Swedish weather, despite the tight tolerances required for the eventual exit.16:26 The frames are designed to be sturdy enough to prevent any structural failure during the turning operation.18:21

More from RAN Sailing

Will the Sanding EVER End? Building Our Dreamboat - Ep. 503 Ran SailingSep 2026Something's Not Right Here! Building Our 52ft Sailboat - Ep. 502Sep 2026This Is Where Boat Builds Break People - Ep. 501 Ran SailingAug 2026Our 52ft Sailboat Build Reaches Another Milestone! - Ep. 500 Ran SailingAug 2026

From RAN Sailing — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.