The Mariner · video

What this video covers

Approaching Lunenburg, Nova Scotia, after 30 days at sea, Chris discovers the MaxProp on his boat Osprey has failed — either the internal mechanism has seized with the blades feathered, or the hub has separated and the blades are gone entirely.6:52 He had not used the engine in weeks and noticed the propeller had gone silent overnight without any collision or fouling.5:00 With no engine, he heaves to 28 miles out to assess options: divert to Halifax, Liverpool, or Chester, or proceed under sail alone to Lunenburg.1:34 He chooses Lunenburg, using PredictWind routing to exploit a favorable 140–160° wind on a 300° course before the wind shifts around 1300.8:59 The plan is to anchor under sail only — jib alone, mainsail left down to preserve damaged battens — in a harbor he notes is deep and well-protected but flanked by Cross Island, where he watched a Volvo 60 he had previously raced wreck on the rocks in 2019.10:02 He walks through the full solo arrival checklist: switching from a safety belt to a life jacket, transitioning from offshore to coastal navigation, rigging anchor, warp, and chain in the cockpit, and timing the harbor entry to the wind window.2:44 The practical lesson: always test the propeller before entering coastal waters, not after.19:58

More from The Mariner

Sailing to Newport, my Trimaran Project & Notes on Archive Management for L- Matrix AI'sJul 2026Taking a Look Around the Waterfront in Lunenburg, Nova ScotiaJun 2026Solo Docking an 80ft Yacht Without Use Of The Auxillary EngineMay 2026Introducing Longitudinal AI SystemsMay 2026

From The Mariner — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.