A lightweight cat-rigged dinghy marketed in Sweden as the Triss Racer, built for responsive and spirited sailing
LOA
Beam
Draft (max)
Displacement
Hull type
Dbrd. Dinghy
Is it for you?
Character
Where this design lands on the numbers a shopper trusts — read straight from her own ratios.
TrailerableBeam 1.35 m — inside the 2.55 m no-permit tow width across most of Europe, and the 2.59 m US and Canadian limit. About 50 kg of hull, so roughly 650 kg on a trailer: check that against your own towing rating.Ramp-launchableAbout 50 kg of hull, with a keel that raises or a draft shallow enough to float off a trailer — she can go back on the trailer at the ramp, not only into the water.Shoal draftDraws 0.10 m, board up where she has one — creeks, sandbars and thin anchorages most keels have to stay out of.
CoastalBluewater
At 3.70 she sits above the 2.0 line — beamy for her weight, and happiest coastal.
Capsize screening 3.70
EasygoingPowered-up
41.1 — a lot of sail for her weight; powered-up and eager, a real performer.
Sail area / displacement 41.1
Powered-up and quick to accelerate — this one likes to sail.
Lighter than ~88% of boats her size on file
Narrower than ~86% of boats her size on file
Compared with 323 boats of the same type within a quarter of her length.
The record
Full specifications
The complete reference set — tap any figure to switch between metric and imperial.
Dimensions
Weights
Rig & sail area
Rig
Cat (unstayed)
Ratios
SA / displacement
41.1
Capsize screening
3.70
Hull
Hull type
Dbrd. Dinghy
Construction
Fiberglass
Production
Years built
First built 1974
Builder
Bombardier
Boats like this, on the water
Nobody has filmed this one — but these are close.
Comparable boats the fleet has on camera: same type, within a quarter of her length. Open the boat, or watch the video — a timestamp means she only appears in passing.
McDougall Waszp3.35 mSame hull family0.5 m shorterA one-design foiling dinghy featuring wings and an unstayed rig, built in the thousands for high-performance racing
Butler Boats Streaker3.88 mSame hull familyNear-identical lengthA 3.88-metre cat-rigged dinghy featuring a high sail-area-to-displacement ratio and a fiberglass option introduced in 1998
Topper International Topper3.40 mSame hull family0.4 m shorterAn Ian Proctor-designed polypropylene dinghy featuring an unstayed cat rig and three versatile sail-area configurations
Ilca 4 (Laser 4.7)4.23 mSame hull family0.4 m longerA Bruce Kirby-designed dinghy sharing the classic Laser hull, optimized with a smaller sail plan for lighter sailors
Alcort Sunfish4.24 mSame hull family0.4 m longerWith a high sail-area-to-displacement ratio of 47.02, this nimble 4.24-meter dinghy remains a benchmark for simple
Several Under License 29er4.40 mSame hull family0.6 m longerA high-performance skiff designed by Julian Bethwaite, featuring a powerful fractional rig for competitive racing
