BoatHowTo · βίντεο

Τι καλύπτει αυτό το βίντεο

Jan Attenstedt and Nigel Calder discuss the risks of maintaining a floating DC electrical system versus establishing a hardwired connection to a seawater grounding plate.0:10 A floating system requires double-pole circuit breakers and switches to ensure complete isolation, which many boaters fail to implement correctly.2:04 Relying on an engine block as a DC negative bus often creates accidental, intermittent paths to ground through the propeller shaft and seawater.1:42 Calder recommends moving DC negative conductors from the engine block to a dedicated DC main negative bus.2:17 This bus should then connect to a grounding bus or plate to create a reliable, intentional grounded system.2:23 When combining these systems, installers must maintain a clear separation between current-carrying conductors and non-current-carrying grounding conductors to prevent stray current.2:35 A properly designed grounded system ensures all negative side components and grounding systems share a common, stable reference to the water.1:31

Περισσότερα από το BoatHowTo

Rewiring an old boat if everything works as should? 😟💰 | Ask The Expert with NIGEL CALDERΟκτ 2026Grounding on Aluminium Yachts 🔧 | Ask The Expert with NIGEL CALDERΣεπ 2026Boat ELECTRIC PROPULSION with only LEAD ACID Batteries ?? | Ask The Expert with NIGEL CALDERΣεπ 2026MaxProp: More Pitch in Reverse than in Forward? 🤔 | Ask The Expert with NIGEL CALDERΣεπ 2026

Από BoatHowTo — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.