Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind is building a new small boat and has stretched the hull design from 5.2 meters to 5.6 meters to gain more space in the work area and forward sections.2:07 A CAD session with Marie recalculates displacement: the hull volume at the waterline comes out at 900 (units unspecified), with a wetted surface area of 13.7 square meters — both increased slightly from the previous iteration.2:42 On the physical build, peel ply is removed from a laminated section after allowing it to dry sufficiently; the surface comes off clean.1:29 Frame layouts are marked up, with frame 21 cut next and frame 39 repositioned to fit the available panel width.0:29 A laser is used to project the designed waterline onto the hull for marking, though that step is deferred to the following day.0:09 The work session ends with the hull clamped down for stability during the peel-ply removal.1:11

Περισσότερα από το Sven Yrvind

Four Sheets of Divinycell for the Hull Sides – I Think That's Enough.Οκτ 2026Nervously Cutting the Divinycell Sheets.Οκτ 2026Trying to Get the Sheerline Right.Οκτ 2026More molds up.Οκτ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.