Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind has flipped his boat to the starboard side and is laminating chine runners on that hull, completing the work faster than the first side.0:13 He thanks donors by name, noting his Swedish state pension is minimal because authorities consider his sailing and reading life as non-qualifying work.0:40 The main technical discussion concerns rudder depth relative to the chine runners: the original plan placed the chine runners as the deepest point of the hull, but Yrvind now judges that arrangement leaves the rudder too small.1:24 His current thinking is to extend the rudder 10 centimeters below the chine runners, though he worries that shift could induce lee helm by moving the lateral resistance aft.1:30 To counteract that, he is considering adding a small centerboard or daggerboard near the bow, partly recessed into the hull.1:47 No final decision is made; the rudder depth and helm balance question remains open.2:10

Περισσότερα από το Sven Yrvind

Four Sheets of Divinycell for the Hull Sides – I Think That's Enough.Οκτ 2026Nervously Cutting the Divinycell Sheets.Οκτ 2026Trying to Get the Sheerline Right.Οκτ 2026More molds up.Οκτ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.