Project Brupeg · βίντεο

Τι καλύπτει αυτό το βίντεο

The conversion of a former fishing trawler into an expedition vessel continues with interior cabin construction and metal fabrication. The crew builds a new office bench and custom bunk furniture, including a headboard and leeboard, using 17mm plywood.6:44 To prevent rot and odors, all wooden components receive a multi-layer epoxy coating, sanded to a 240-grit finish for a smooth surface.38:11

Simultaneously, the team addresses structural warpage in steel sliders.0:14 After initial attempts to counteract heat-induced bending failed, they implement a new welding strategy: alternating six-to-eight-inch welds on opposite sides to balance contraction forces.32:35 They also use custom-cut steel wedges to hold the metal at a 43mm gap during the cooling process, combined with scrap alloy bar as a heat sink to maintain dimensional stability.33:26 A damaged MIG torch lead, previously suspected of causing gas flow issues, is identified and managed.26:47 The project remains focused on interior fit-out and structural steel alignment before the vessel returns to the water.

Περισσότερα από το Project Brupeg

What caused the steering to fail - Project Brupeg Ep.463Οκτ 2026CHAOS! & our first Night Time Trailer Haul Out - Project Brupeg Ep.462Σεπ 2026Look, It's possible we should have cleaned this before now... Project Brupeg Ep.461Σεπ 2026The Ridiculously Powerful Davit Winch - Project Brupeg Ep.460Σεπ 2026

Από Project Brupeg — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.